Weld Geometry
✓ Weld size within AWS limits (5-8.5 mm)
Materials
Base Metal
250 MPa
Yield Strength
Electrode
400 MPa
Yield Strength
Fatigue Analysis
Stress Concentration: 1.40
Estimated Life: 1.03e+2 cycles
Weld Properties
Section Modulus
299.91 mm³
Joint Efficiency (Tension):85%
Joint Efficiency (Shear):75%
Stress Analysis
Von Mises Stress
174.68 MPa
Allowable Stress
100.00 MPa
Safety Factors
⚠ Increase weld size or reduce load
⚠ Consider fatigue-resistant design
Welding Estimates
Note: Time estimates assume manual welding at ~150mm/min. Actual time varies with process, position, and welder skill.
S-N Fatigue Curve (Category B)
📋 Weld Specification
Weld Callout:
Joint Type: Fillet Weld (Transverse)
Leg Size: 6 mm
Length: 100 mm
Electrode: E70XX
Base Material: A36
Required Preheat: None (or per WPS)
Interpass Temp: 250°C max
Inspection:
- Visual: 100%
- RT/UT: 100%